家具板式平面 UV 喷涂线（UV Spraying Line for Flat Furniture Panels）

家具板式平面 UV 喷涂线是专为家具行业平板类基材（如衣柜门板、橱柜面板、书桌台面等，常见材质包括实木复合板、三聚氰胺饰面板、密度板等）设计的自动化涂装生产线，核心依托 UV（紫外光固化）工艺实现高效涂装。其核心优势在于：一是适配板式家具的平面形态，通过辊道输送与往复式喷枪组合，确保板材表面（含边角区域）涂层均匀，避免人工喷涂易出现的流挂、漏喷问题；二是 UV 漆经喷涂后，通过紫外光照射可在 3-5 分钟内快速固化，大幅缩短传统涂料（如 PU 漆）数小时的干燥周期，显著提升生产效率；三是固化后的漆膜硬度高（可达 2H 以上）、耐刮擦、抗黄变，能满足家具面板长期使用的外观与性能需求。

该生产线可集成自动除尘（通过毛刷 + 风刀清除板材表面粉尘，避免影响涂层附着力）、底漆 / 面漆多层喷涂、UV 固化、冷却等连贯工序，部分高端设备还支持漆膜厚度在线检测与参数自动调整。同时，设备适配低 VOC 环保 UV 漆，符合家具行业环保标准，广泛应用于现代板式家具工厂，既能满足批量标准化生产，也可通过程序切换适配不同尺寸、材质的家具面板，兼顾效率与灵活性。

UV Spraying Line for Flat Furniture Panels is an automated coating production line specially designed for flat substrates in the furniture industry (such as wardrobe door panels, cabinet panels, desk tops, etc., with common materials including solid wood composite panels, melamine-faced panels, MDF, etc.), relying on UV (Ultraviolet Curing) technology for efficient coating. Its core advantages are as follows: first, it adapts to the flat shape of panel furniture, and through the combination of roller conveying and reciprocating spray guns, it ensures uniform coating on the panel surface (including edge areas), avoiding problems such as sagging and missing sprays that are common in manual spraying; second, after spraying, UV paint can be quickly cured within 3-5 minutes under UV light irradiation, greatly shortening the drying cycle of traditional paints (such as PU paint) which takes several hours, and significantly improving production efficiency; third, the cured paint film has high hardness (up to 2H or above), scratch resistance and yellowing resistance, which can meet the appearance and performance requirements of furniture panels for long-term use.

This production line can integrate coherent processes such as automatic dust removal (removing dust from the panel surface through brushes + air knives to avoid affecting coating adhesion), multi-layer spraying of primer/topcoat, UV curing, cooling, etc. Some high-end equipment also supports online detection of paint film thickness and automatic parameter adjustment. At the same time, the equipment is compatible with low-VOC environmentally friendly UV paint, meeting the environmental standards of the furniture industry. It is widely used in modern panel furniture factories, which can not only meet mass standardized production, but also adapt to furniture panels of different sizes and materials through program switching, balancing efficiency and flexibility.